2012 +GF+ MIKRON HPM450U 5-Axis VMC with 7-Station Pallet Changer

2012 +GF+ MIKRON HPM450U 5-Axis VMC with 7-Station Pallet Changer

orCall +1 262-320-3399

Description

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS OF FRANKE CNC SALES CONTRACT, WE OFFER FOR YOUR CONSIDERATION:
 
Used 2012 +GF+ MIKRON HPM 450U 5-Axis Machining Center with 7-Station Pallet Changer:
                                                                       
HISTORY                                                                      
Machine was manufactured at +GF+ AgieCharmilles AG in Nidau, Switzerland 7/2012
                
CONTROL                                                                   
HEIDENHAIN iTNC 530 with Ethernet and electronic handwheel for part setup 
                                                                          
WORKING RANGE                                                             
Longitudinal X-Axis.....................................   23.62" (600 mm)
Transverse Y-Axis............................................   17.72" (450 mm)
Vertical Z-Axis.........................................   17.72" (450 mm)
Maximum Workpiece Size……17.72” (450 mm) diameter x 17.72” (450 mm) height x 330 lbs (150 kg) 
B-Axis (Tilt).......................................   -120 / +45 degrees
C-Axis (Rotary)........................................   n x 360 degrees
Number of simultaneous axis...........................   5/5 simultaneous
                                                                          
FEED DRIVE                                                                
Drive: Ballscrews in X,Y,Z-axis
Drive: Direct Drive Torque Motors in B and C-axis
Rapid Traverse X/Y/Z...................................   866 IPM (22 m/min)
Table Rapid Speed B-Axis (Tilt)......................................   50 rpm 
Table Rapid Speed C-Axis (Rotary)....................................   140 rpm !
Maximum Acceleration X/Y/Z.....................................   up to 5 m/sec2
                                                                          
DIRECT DRIVE TORQUE MOTOR RTT (ROTARY TILT TABLE)                                                  
Pallet Clamping Surface..11.02" x 11.02” (280 x 280 mm) or 13.78” x 13.78” (350 x 350 mm) pallet sizes
Maximum workpiece weight (manual loading).............   330 lbs (150 kg)
Maximum Workpiece Size……17.72” (450 mm) diameter x 17.72” (450 mm) height x 330 lbs (150 kg) 
Pallet type this machine and pallet changer are equipped for.............   System 3R Dynafix pallets 
Number of pallet stations pallet changer is equipped with……7 x pallet stations
With hydraulic clamping in turning and swivelling axis                    
All feed motors are liquid-cooled                                         
Direct measuring system HEIDENHAIN rotary encoders 0.00004” (1 um) resolution                        
                                                                          
AUTOMATION                                                                
BLUM laser tool measuring system
M&H Infrared touch probe
system 3R Dynafix automatic pallet changer with 7 x pallet stations
 
60 POSITION TOOL CHANGER 
Number of magazine places……………………….60 positions
Spindle taper…………………………………………HSK-A63
Maximum tool diameter……………………………..3.15” (80 mm)
Maximum tool diameter with unoccupied adjacent positions..4.92” (125 mm)
Maximum tool length…………………………………10.6” (270 mm)
Maximum permitted tool weight……………………13.2 lb (6 kg)
                                                                          
WEIGHT                                                                    
Including pallet changer...........   Approximately 16,976 lbs (7,700 kg)
Machine base.......................   Polymer concrete (man made granite)
                                                                          
STEP-TEC SWISS MADE SPINDLE                                                                   
Spindle taper..................................................   HSK-A63
Spindle RPM.................................................   100-20,000 rpm
Spindle power...................................   40 HP (30 kW)
Spindle torque 40% ED...............................   67 Ft/Lb (91 Nm)
Maximum tool diameter……………………..3” (80 mm)
Maximum tool length from the spindle nose….13.75” (350 mm)
Maximum tool weight…………………………..13.26 lbs (6 kg)
                                                                          
EQUIPPED WITH:
Complete machine enclosure
Oil mist extraction system
Pallet changer Dynafix
172 gallon (650 l) band filter coolant tank with micro paper filtration system 
  -18-70 bar (260-1,000 PSI) manually adjustable high-pressure Coolant Thru the Spindle (CTS)
  -Flow rate 5.3 gallon/min (20 l/min)  
Chip conveyor for higher demands for aluminum machining
Spray Gun
M&H Infrared touch probe
BLUM laser tool measuring system
Blow-off unit for laser measuring system
Beacon
Oil mist spray unit
Tilting the working plane. This option activates the optional Heidenhain software cycle 19
Direct measuring system HEIDENHAIN glass scales X/Y/Z 0.00004” (1 um) resolution positioning                                            
Direct measuring system HEIDENHAIN rotary encoders B/C 0.00004” (1 um) resolution positioning
External spindle chiller                            
 


Specifications

Manufacturer+GF+ MIKRON
ModelMIKRON HPM 450U
Year2012
ConditionUsed
Stock Number064460