orCall +1 262-320-3399


5-AXIS MACHINING CENTERS DECKEL MAHO DMU125P SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 1998 DMG MORI DECKEL MAHO DMU125P 5-Axis Universal Machining Center: INSPECT IN USA PLANT UNDER POWER BY APPOINTMENT! Machine was  manufactured in Pfronten, Germany HEIDENHAIN MillPlus CNC Control -SERVICE HISTORY- The following parts have all been replaced within the past 2 years: -New spindle -All new drives -All new ballscrews -DESIGN CONCEPT- This is a UNIVERSAL machining center meaning it is two machines in one: both a vertical AND horizontal machining center. The universal milling head on this machine is automatic and programmable. It can be swivelled in 4 seconds from vertical to horizontal, and in combination with the rotary swivel table makes 5-sided, full 5-axis machining in 1 set up possible. Setup time is reduced, the need for multiple setups is eliminated and accuracy and precision are improved. The P Series machines are intended for fully automatic manufacturing of highly complex workpieces in a single set up. Ideal for both small and large batches with the high production components including high pressure CTS (Coolant Thru The Spindle) and chip conveyor. -WORKING RANGE- -NC SWIVEL ROTARY TABLE, has bearings on both sides- Swivel angles    To spindle -45 degrees, from working spindle +30 degrees -AUTOMATIC UNIVERSAL MILLING HEAD- Automatic swivel from horizontal to vertical in approximately 4 seconds. The auto swivel head makes this machine 2 machines in one because both vertical and horizontal machining is possible with one workpiece clamping. Together with the NC Swivel Rotary table 5-Sided, full 5-Axis machining is possible with one workpiece clamping. -12,000 RPM Motor Spindle- -FEED DRIVES- -60 POSITION TOOL CHANGER- Maximum tool diameter with no neighbouring empty pockets    3.94" (100 mm) Chip-to-chip time CAT40    Approximately 15 seconds vertical, 7 sec horiz -HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM- -HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM- -EXTERNAL FLOOD COOLANT PUMP ON OUTSIDE OF SPINDLE- -INTERNAL COOLANT SUPPLY THRU THE SPINDLE- -EQUIPPED WITH- Fully enclosed protection cabin Infrared parts measuring probe Chip conveyor


ManufacturerDMG MORI
Stock Number064234
Number of axisFull 5-Axis
Tool changer60 ATC
ControlHH MillPlus
Spindle12,000 rpm
Spindle taperCAT40
X axis49.21" (1,250 mm)
Y axis34.65" (880 mm)
Z axis31.5" (800 mm)
X axis (longitudinal)49.21" (1,250 mm)
Y axis (transverse)34.65" (880 mm)
Z axis (vertical)31.50" (800 mm)
Clamping surface39.37" diameter (1,000 mm)
Maximum table load2,205 lbs (1,000 kg)
Rapid speed rotary axis5.3 rpm
Rapid speed swivel axis5.6 rpm
Rotation range360 x 0.001 degree (Full 4th axis)
TypeBrushless AC/Digital
Power 40% duty cycle (s3)20 hp
Power 100% duty cycle (s1)13.5 hp
Spindle speed range20-12,000 rpm
Max spindle torque95 ft/lbs
Spindle bearing diameter front3.15"
Clamping power2,250 lbs
Feed rate (x-y-z)0.04-590 ipm (1-15,000 mm/min)
Rapid feed (x-y-z)1,575 ipm (40 m/min)
Feed power (x-y-z)2,250 lbs (10 kN)
Ballscrew x/y/z50x20/40x20/40x20 mm
Magazine typeChain, horizontal, double gripper
Number of pockets60
Maximum tool weight22 lbs (10 kg)
Maximum tool diameter with neighbouring empty pockets6.3" (160 mm)
Maximum tool length17.7" (450 mm)
Tool change timeApproximately 6 seconds
Input resolution0.001 mm
Pump output external jets flow rate5.3 gallon/minute (20 l/min)
Coolant tank capacity160 gallon (606 l)
Pump output thru the spindle6 gallon/minute (23 l/min)
Coolant pressure580 PSI (40 bar)