MIKRON MILL UCP 600 Vario

MIKRON MILL UCP 600 Vario

or
Call 262-432-7474

Description

5-AXIS MACHINING CENTERS UCP 600 Vario SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 2009 +GF+ MIKRON UCP600 Vario full 5-Axis machining center: *May be inspected under power in our Wisconsin showroom by appointment* Machine was built at +GF+ in Nidau, Switzerland CONTROL HEIDENHAIN iTNC 530 with Ethernet and electronic handwheel for part setup WORKING RANGE FEED DRIVE ROTARY TILTING TABLE WITH RADIAL GROOVES All feed motors are liquid-cooled Direct measuring system HEIDENHAIN rotary encoders AUTOMATION Robot interface on control with PLC preparation for robot loading Air clamp/unclamp in table WEIGHT Approximately 16,976 lbs (7,700 kg) STEPTEC SWISS MADE SPINDLE EQUIPPED WITH: Chip conveyor Spray gun Direct measuring system HEIDENHAIN glass scales X/Y/Z, Encoders B,C Oil & Emulsion mist separator External spindle chiller Coolant tank with paper band micro filter

Show All

Specifications

ManufacturerMIKRON MILL
ModelUCP 600 Vario
Year2009
ConditionUsed
Stock Number064334
StatusAvailable
Number of axisFull 5-Axis
Tool changer30 ATC
ControlHH iTNC 530
Spindle20,000 rpm
Spindle taperHSK A63
X axis23.6" (600 mm)
Y axis17.7" (450 mm)
B axis-115/+30 degrees
Z axis17.7" (450 mm)
C axis360 x 0.001 degrees
Longitudinal x-axis23.6" (600 mm)
Cross y-axis17.7" (450 mm)
Vertical z-axis17.7" (450 mm)
B-axis (swivel)-115/+30 degrees
C-axis (rotary)n x 360 degrees
Feed rate x/y/z590 IPM (15 m/min)
Rapid speed x/y/z866 IPM (22 m/min)
Rapid speed b-axis (swivel)25 RPM
Rapid speed c-axis (rotary)33 RPM
Clamping surface17.72" (450 mm) diameter
Maximum workpiece weight441 lbs (200 kg)
Automatic tool changer30 positions
Blum laser tool measuring systemStandard, included
Infrared parts measuring touch probePreparation for M&H
Machine basePolymer concrete (man made granite)
Spindle rpm20,000 RPM
Spindle power 40% ed40.2 HP (30 kW)
Spindle torque 40% ed67.1 Ft/Lb (91 Nm)