MIKRON MILL UCP 600 Vario
MIKRON MILL UCP 600 Vario
Description
5-AXIS MACHINING CENTERS UCP 600 Vario SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 2011 +GF+ MIKRON UCP 600 Vario Full 5-Axis Machining Center with 7 APC: Machine was made in Nidau, Switzerland Approximately 10,134 Spindle on hours total on fresh spindle Approximately 19,586 Program run hours total CONTROL Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup WORKING RANGE FEED DRIVE WORKING TABLE Maximum workpiece weight (automatic with pallet changer) 198 lbs (90 kg) Max pallet size possible for this machine 13.8" x 13.8" (350 x 350 mm) All feed motors are liquid-cooled Direct measuring system Heidenhain rotary encoders AUTOMATION WEIGHT STEPTEC SWISS MADE SPINDLE EQUIPPED WITH: Chip conveyor Spray gun Spindle chiller Direct measuring system Heidenhain glass scales X/Y/Z, Encoders B,C Completely enclosed machine cabin 18-70 bar (261 PSI-1,015 PSI) Coolant Thru the Spindle, w/paper band micro filter BLUM laser tool measuring of tool length and diameter M&H Infrared Parts Measuring Touch Probe
Specifications
| Manufacturer | MIKRON MILL |
| Model | UCP 600 Vario |
| Year | 2011 |
| Condition | Used |
| Stock Number | 064264 |
| Status | Available |
| Number of axis | Full 5-Axis |
| Tool changer | 60 ATC |
| Control | HH iTNC 530 |
| Spindle | 20,000 rpm |
| Spindle taper | HSK A63 |
| X axis | 23.6" (600 mm) |
| Y axis | 17.7" (450 mm) |
| Z axis | 17.7" (450 mm) |
| Longitudinal x-axis | 23.6" (600 mm) |
| Cross y-axis | 17.7" (450 mm) |
| Vertical z-axis | 17.7" (450 mm) |
| B-axis (swivel) | -115/+30 degrees |
| C-axis (rotary) | n x 360 degrees |
| Feed rate x/y/z | 590 IPM (15 m/min) |
| Rapid speed x/y/z | 866 IPM (22 m/min) |
| Rapid speed b-axis (swivel) | 25 RPM |
| Rapid speed c-axis (rotary) | 33 RPM |
| Clamping surface | 13.8" x 13.8" (350 mm x 350 mm) |
| Maximum workpiece weight (manual loading) | 441 lbs (200 kg) |
| Pallet type this machine is equipped for | System 3R Dynafix |
| Number of pallet stations this machine is equipped with | 7 |
| Automatic tool changer | 60 positions |
| Blum laser tool measuring system | Standard |
| Infrared parts measuring touch probe | M&H |
| Automatic pallet changer number of pallet stations | 7 |
| Including pallet changer | Approximately 16,976 lbs (7,700 kg) |
| Machine base | Granite |
| Spindle rpm | 20,000 RPM |
| Spindle power 40% ed | 40.2 HP (30 kW) |
| Spindle torque 40% ed | 67.1 Ft/Lb (91 Nm) |